SNP100H | 100 CFM | 0.8 Sone | Humidity Sensing | No Attic Access Required Bathroom Ventilation Exhaust Extractor Fan

129,50 ر.س

+ Free Shipping

Price: [price_with_discount]
(as of [price_update_date] – Details)


[ad_1]

Product Description

SNP100SNP100

logologo About KAZE APPLIANCE

Established in 2011, KAZE APPLIANCE specialize in quiet bathroom exhaust fans. Our lineup includes LED, humidity sensing and motion sensing bathroom exhaust fans.

KAZE APPLIANCE Bathroom Ventilation Fan

Powerful Yet Quiet. No Attic Access Required

Model: SNP100H

Humidity Sensing

Powerful suction of 100 CFM at quiet sound level of 0.8 sones

CEILING OPENING SIZE – Please note the ceiling opening requirement is 9 x 9 inch, resizing your ceiling opening will be needed if existing fan size is different. SUPER QUIET – Powerful 100 CFM and quiet operation at 0.8 Sones. Suitable for bathroom size up to 100 square feet. INSTALLATION – No Attic Access Required. See photos and manual for installation instructions. HUMIDITY SENSING – Automatically switch on/off the fan unit to maintain desirable humidity level and hands free operation. DUCTING – Detachable 4 inch polymeric duct with back draft prevention damper. RELIABILITY – Proudly stand behind our products.

SNP100 970x600SNP100 970x600

KAZE APPLIANCE SNP100H Super Quiet 100 CFM , 0.8 sones Humidity Sensing Ceiling Mounted Ventilation Fan

Model No: SNP100H. Humidity Sensing, 100 CFM, 0.8 sones super quiet.

Please note the ceiling opening requirement is 9 x 9 inch, resizing your ceiling opening will be needed if existing fan size is different.

Suitable for standard bathroom size up to 100 square feet.

KAZE Appliance is proud to present SNP100H with Humidity Sensing feature. Redesigned one piece blower assembly with removable 4 inch polymeric duct further improves stability and reliability. Built with high-quality components and permanently lubricated motors to give continuous, trouble-free operation.

Humidity Sensing — Humidity sensing fan uses a sophisticated humidity sensor that responds to:

(1) moderate to rapid increase in humidity or (2) humidity above a user-adjustable set-point (30% to 80% relative humidity)

Delay Timer — The SNP100H is also equipped with an adjustable delay timer (5-60 minutes) that provides additional run time for the fan to complete the remaining necessary ventilation after the sensor has stopped sensing a rise in humidity and the humidity level is below the user setting.

Air delivery rate: 100 CFM

Noise Level: 0.8 Sones Super Quiet

Duct Size: 4-inch round polymeric duct with built in back draft metal damper.

Grill Dimension: 11 13/16 x 11 7/16 inches polymeric resin grille attaches directly to housing with torsion springs

Housing Dimension: 9 x 9 x 5 3/4 inch

Voltage / Frequency: 120Volt/60Hz (0.2A Motor Current)

Wattage: 26W

Retrofit Installation Steps

___________________________________________________________________________________________________________________________________

SNP100SNP100

SNP100SNP100

SNP100SNP100

Step 1 : Disassemble Fan

Unplug blower assembly power connector from junction box/wiring panelRemove blower assembly (3 screws) Remove junction box/wire panel (1 screw) Remove duct connector.

Step 2 : Prepare ceiling opening

Prepare ceiling opening to 9” by 9”, leave existing ductwork and wiring in place.

Install additional wood support beam on both sides above ceiling opening for securing metal housing in Step 4.

Step 3 : Install Housing

Pull wiring and duct into metal housing respectively.Insert housing into ceiling opening.

SNP100SNP100

SNP100SNP100

Step 4 : Connect Ducting and Wiring

Secure housing flange to additional beam with screws.Connect wiring according to the wiring diagram. Re-install wire panel.Connect ducting to duct connector using foil tape and push duct connector back through opening.

Step 5 : Finish Up

Insert blower assembly back to housing and secure the 3 screws.Connect power cable to wire panel.Install grille by squeezing both torsion spring and insert into slot in blower assembly.

KAZE APPLIANCE Collection of Power | Quietness | Functionality

___________________________________________________________________________________________________________________________________

CFM
120 120 120 100 100 100

Noise (sones)
0.3 0.3 0.3 0.8 0.8 0.8

LED Light

Humidity Sensor

EZ Install

CEILING OPENING SIZE – Please note the ceiling opening requirement is 9 x 9 inch, resizing your ceiling opening will be needed if existing fan size is different.
SUPER QUIET – Powerful 100 CFM and quiet operation at 0.8 Sones. Suitable for bathroom size up to 100 square feet.
INSTALLATION – No Attic Access Required. See photos and manual for installation instructions.
HUMIDITY SENSING – Automatically switch on/off the fan unit to maintain desirable humidity level and hands free operation.
DUCTING – Detachable 4 inch polymeric duct with back draft prevention damper.
RELIABILITY – Proudly stand behind our products.

[ad_2]

Reviews

There are no reviews yet.

Be the first to review “SNP100H | 100 CFM | 0.8 Sone | Humidity Sensing | No Attic Access Required Bathroom Ventilation Exhaust Extractor Fan”

Your email address will not be published. Required fields are marked *

Shopping Cart